Wall drags at 45° lay slopes; diagonal tubes drawn as one pipe; no side arrow on drag ghosts (t35, t36)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 22:20:48 -04:00
parent f19facbe5c
commit 814b51df46
17 changed files with 172 additions and 65 deletions
@@ -372,6 +372,10 @@ above, including:
  also fills one cell past its corner so a diagonal run is sealed (grains move diagonally and
  would otherwise slip through where two pieces meet). Square walls placed diagonally still
  touch only at corners and leak there, like any square blocks.
+  Later the same day the owner asked for the Wall piece itself to work diagonally, the way tubes
+  do, so the separate Sloped wall piece left the build menu: a wall drag at about 45° lays slopes
+  (solid side below, T flips it during the drag), straight drags and clicks lay squares, and for a
+  single block T cycles square and the four corners. Slope ids are unchanged, so saves still load.

 - **Diagonal screw tubes (t35, 2026-10-25).** Tubes run in eight directions. A drag at about 45°
  lays a diagonal run pointing along the drag, and R cycles all eight for a single tube. Diagonal